VersaFlow Clamp-on Ultrasonic Flow Meters
VersaFlow Clamp-On Ultrasonic flow meters are designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Available in configurations for pipe line sizes from DN15 to DN4000 (1/2” to 160”), the clamp-on design offers a cost-effective means of measuring liquid flow through a pipe. With designs that can withstand up to 200˚C (392˚F), this technology is ideal for liquids with limited solids or gas content. Because it mounts on the outside of the pipe, there is no need to worry about material compatibility with the process being measured or the pressure in the pipeline
FeaturesShowHide
- Ultrasonic clamp-on to provide cost-effective solution
- Easy sensor mounting for bigger pipe diameter to 160” (DN 4000)
- Minimized uncertainty
- Typical temperature: 35 - 50°C ( 95 - 120o F)
- Typical pressure: 7 to 16 bar g (100 to 230 psig)
- Can handle wide flow range
- Retrofit is also possible
ApplicationsShowHide
- For use in oil and gas industry
- Ultrasonic meter can be offered for non-invasive pipes and bigger line sizes
- High pressure is not an issue as the meter is clamped on and not in contact with fluid medium
- Independent of conductivity
- Service: Hydrocarbon condensate, HFO, diesel , kerosene
- Typical pipeline size 2” to 40” (DN 50 to 1000)
Need help?
VersaFlow Clamp-on Ultrasonic Flow Meters
VersaFlow Clamp-On Ultrasonic flow meters are designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Available in configurations for pipe line sizes from DN15 to DN4000 (1/2” to 160”), the clamp-on design offers a cost-effective means of measuring liquid flow through a pipe. With designs that can withstand up to 200˚C (392˚F), this technology is ideal for liquids with limited solids or gas content. Because it mounts on the outside of the pipe, there is no need to worry about material compatibility with the process being measured or the pressure in the pipeline
FeaturesShowHide
- Ultrasonic clamp-on to provide cost-effective solution
- Easy sensor mounting for bigger pipe diameter to 160” (DN 4000)
- Minimized uncertainty
- Typical temperature: 35 - 50°C ( 95 - 120o F)
- Typical pressure: 7 to 16 bar g (100 to 230 psig)
- Can handle wide flow range
- Retrofit is also possible
ApplicationsShowHide
- For use in oil and gas industry
- Ultrasonic meter can be offered for non-invasive pipes and bigger line sizes
- High pressure is not an issue as the meter is clamped on and not in contact with fluid medium
- Independent of conductivity
- Service: Hydrocarbon condensate, HFO, diesel , kerosene
- Typical pipeline size 2” to 40” (DN 50 to 1000)